Watch BP Home A with Bluetooth x1

The WatchBP Home A BT is a non-invasive digital blood pressure device that uses the oscillometric technique and an upper-arm blood pressure cuff to measure systolic and diastolic blood pressures and pulse rate. The device detects the appearance of atrial fibrillation during measurement and gives a warning signal with the reading once the atrial fibrillation is detected. The device has Bluetooth capability and the memory data can be transferred to the Bluetooth enabled phone by connecting wirelessly.

The device features "Usual Mode", for single measurements at any time and automatic storage of the measured results, as well as "Diagnostic Mode" a 7-day self measurement program that strictly follows ESH/AHA/BHS guidelines.

Clinically validated according to the ESH protocol this blood pressure monitor is officially recommended by NICE, to be used during routine blood pressure measurement.

Features

• Atrial fribrillation (AFIB) detection
• Takes 3 consecutive measurements for high accuracy, as recommended by doctors
• User friendly software that allows easy data transfer and analysis
• Bluetooth technology
• PC connectivity via USB connection
• "Usual mode" for single measurements and "Diagnostic mode" for a 7-day self measurement program

Specifications
• Operating condition: 10 to 40°C
• Dimensions: 150 x 100 x 50mm
• Measuring procedure: Oscillometric, corresponding to Korotkoff
• Measurement range: 30 - 280mmHg blood pressure, 40 - 200 bpm pulse
• Cuff pressure display range: 0 - 299mmHg
• Cuff pressure display resolution: 1mmHg
• Static accuracy: Pressure within ±3 mmHg
• Pulse accuracy: ±5% of the readout value
• Voltage source: 4 x 1.5V batteries; size AA, Mains adaptor DC 6V, 600mA (optional)
• Warranty: 5 years (when registered)

• Device corresponds to the requirements of the standard for non-invasive blood pressure monitor: EN 1060-1; EN 1060-3 ; IEC 60601-1, IEC 60601-1-2; IEC 60601-1-11, ESH protocol